BMES-1 Early Strength Water Reducer

Features
    * Apply for prefabricated component and casting on the spot required
 early strength.
    * Can bring about a striking effect  when put into concrete of above -5C.
 Suitable for evaporating product of concrete.
    * Have the functions of early strength,no chloride,high water reducing, 
can improve mixed consistency of concrete.
Specification

Items

 Specification
   Water reducing ratio %    ¡Ý12
   Water secreting ratio %      ¡Ü 95
  Setting time difference min Initial set -90 - +90
  Final set
  Compressive strength ratio%

 

    1d ¡Ý140
    3d ¡Ý130
    7d   ¡Ý115
   28d ¡Ü105
  Shrinkage ratio %    28d ¡Ü135
 Action of reinforcing bar corroded by rust   nothing 
Usage and Caution
    1) The condition of using this  product must be higher than
-5C.
    2)Recommend use level of the product is 1.0%-2.0% of binding  material
  weight, may mix together with cement,sand,stone and water,also may mix at last.
    3)Please comply with the application technology rules of extra agent for concrete.
    4) Strictly forbid to mix any oily material.
    5) Not used for food.

            return